Now, you can modify the file. Like Us? Type the following command (ah stands for "attribute hidden"):dir c:\boot.ini /ah
You should see the boot.ini file. It is suggested to backup the Boot.ini file before editing. http://txtbl.com/windows-10/bootcfg-cannot-open-boot-ini-file.html
Describe the sequence of events please? If you get a message of "Access Denied" or similar error messages, that explains the problem. Follow the on-screen instructions to add installations to the boot.ini file. 9, When all available options is done, you can be back to reboot the computer. make/model of PC, message on screen, etc R. see here
I did load the drivers for the mobo's raid and sata during install but it dosn't change anything, and install progresses the same whether i load them or not. If you are changing boot options for Windows 8, Windows Server 2012, Windows 7, Windows Server 2008, or Windows Vista, see Boot Options in Windows Vista and Later.] Prior to Windows For information about the Startup and Recovery dialog box, see Help and Support Center. Doesn't really have the same ring as Tweet Tweet does it?
R. Have you set the startup device order or boot order? At the welcome screen press ‘R' to enter the Recovery Console At the recovery console, select your Windows XP installation and enter your Administrator password if requested At the prompt issue Boot.ini Location Windows 10 I was able to use the OS & Recovery cd to follow the rebuild steps to allow me to login to Windows again, however when I tried to use the same
Removing an Operating System At the command prompt, type: bootcfg /delete /ID# Where # specifies the boot entry ID that you want to be deleted from the operating systems section of Where Is Boot.ini In Windows 10 Yes, my password is: Forgot your password? If it automatically ends up in C:\WINDOWS> then type the bootcfg /rebuild If it is not exactly C:\WINDOWS> then the windows folder is not fully installed and it will not work! On the Advanced tab, click Settings under Startup and Recovery.
Similar Topics ATI Radeon x600 pro pci express - install causes infinite reboot loop Dec 17, 2005 Windows 2000 install stuck in a loop Nov 21, 2005 xp home install endless Windows 10 Boot.ini File Location Setting the Time Out At the command prompt, type: bootcfg /timeout# Where # specifies the time in seconds after which default operating system will be loaded. Easy remote access of Windows 10, 7, 8, XP, 2008, 2000, and Vista Computers Click here to find out more Reboot Hundreds of computers, disable flash drives, deploy power managements settings. Can you tell me how to solve this problem if my new hard disk corrupt or got problems?
Hot Scripts offers tens of thousands of scripts you can use. http://ss64.com/nt/bootcfg.html Reply hottez22 says: December 4, 2012 at 06:02 I'm still confused. Bootcfg Cannot Open Boot.ini File Part 1Fix Boot.ini on Working Computer Check reasons for Boot.ini missing issue If you received the error message saying that "Cannot fins the C:oot.ini file" or "Invalid Boot.ini, loading from C:Windows", Edit Boot.ini Windows 10 Im pretty okay with my comp so no dirty or damaged disc so on… really weird that it just doesnt load from my cd and to make things worse when it
Then you need to Select Operation System you're going to use. Additionally, this option also allows select the installations that you want to add to the Boot Configuration Data store. This command is only valid in Recovery console! Feeling lost, i try install back my new hard disk, walla, it load like no problems occurred. Edit Boot.ini Windows 7
default=multi(0)disk(0)rdisk(0)partition(1)WINDOWS This is the default system. Capture Date SSD Is The New RAM HOWTO: Move Google Mail (Gmail) Notes to iCloud HOWTO: Sync iCloud Notes Properly On All Your Devices Internet Privacy - It's Your Right To Further information is available at: Windows 2000: http://support.microsoft.com/kb/229716/ Windows XP: http://support.microsoft.com/kb/307654/ Windows Server 2003: http://support.microsoft.com/kb/326215/ (!) If the system partition was not restored to its original position, then the boot.ini file http://txtbl.com/windows-10/bootcfg-error-cannot-open-boot-ini-file.html Then type the following command attrib C:oot.ini +s +h and press "Enter". 9.
Items in bold are only available from the recovery console Default identification strings: OS Load Options = /Fastdetect Load Identifier = Microsoft Windows XP Professional If you intend to rebuild the Bootcfg Cannot Open Boot.ini Windows 10 By the method you described though, after navigateing to the windows directory, i get "error:cannot open boot.ini file." When i tried it from my xp cd it analyzed the drive for In the System Properties dialog box, on the Advanced tab, click Settings under Startup and Recovery.
Look for the feed icon! Adding an Operating System At the command prompt, type: bootcfg /copy /d Operating System Description /ID# Where Operating System Description is a text description (e.g. ERROR: Cannot open BOOT.INI file in windows vista July 12th, 2012 6:24pm As you should. Edit Boot.ini Windows Xp If so unplug.
Then how to fix this Boot.ini file missing problem? Post the specs of your PC if you can't find this and I'll have a look for you. Then in the I386 folder i found all the boot files (they say boot in name) copied all of them I think theres was 5. Windows XP Home Edition), and where # specifies the boot entry ID in the operating systems section of the BOOT.INI file from which the copy has to be made.
i.e. BOOTCFG /default Specify the default OS BOOTCFG /delete Delete an OS entry [operating systems] section of Boot.ini BOOTCFG /ems Redirect the EMS console to a remote computer (server only). (Emergency Management and it will tell you what to do in the last paragraph. Hi i have a bigger problem… i cant start from my windows xp sp2 cd because it doesnt load it… it keeps saying that there isnt a disc in it!
Log in with Facebook Log in with Twitter Log in with Google Your name or email address: Do you already have an account? Mike Feb 20, 2009 #4 sethbest TS Enthusiast Topic Starter Posts: 79 couldnt get any of my windows disc's to get to the point where i could load repair utility. Because this functionality is limited, it is not discussed in this section. close WindowsWindows 10 Windows Server 2012 Windows Server 2008 Windows Server 2003 Windows 8 Windows 7 Windows Vista Windows XP Exchange ServerExchange Server 2013 Exchange Server 2010 Exchange Server 2007 Exchange
After switching on your computer or after restarting Windows XP you receive either of the error messages below and cannot get into Windows. It tells you to use BCDEDIT for Vista and latter. -- . -- "stuckFree" wrote in message news:a4a0cb93-2901-4cd0-84e6-f00317128a65...