Home > Windows 10 > After Upgrading Firmware Shm165p6s Cannot Burn

After Upgrading Firmware Shm165p6s Cannot Burn

Contents

Maximum supported speed from the LiteOn drive is 8X in this case, while the other two drives support 12X. Ripping process completed, EAC reports no problems, Read&Test CRC comparison successful for all tracks Both protected Audio discs were ripped and reproduced successfully. - Cactus Data Shield 200.0.4 - 3.0 build Booktype Support All LiteOn based drives support the Booktype setting, allowing the user to maximize compatibility. Philips, Prodisc (R04) and Traxdata media were burned at 8X and 12X respectively instead of 16X.

Reading Tests - CD Format Like all recent LiteOn drives, the 165P6S supports up to 48X reading speed for CD media (pressed) and 32X for Re-writable CD media. The drive reported good reading for DVD±R/RW media at 12X, however competing drives have already reached 16X for the DVD±R formats. Do not power off the player or disconnect it from the AC power outlet. Using version - AnyDVD 6.1.9.3 and CloneDVD 2.9.1.2 Right click on AnyDVD Red Fox icon shows: MEMOREX DVD+-RAM 510L V1 MWS7 2006/03/22 17:21 (cannot locate any information on firmware for my have a peek here

Can't Burn Cd Windows 10

Using other drives, even another SHM-165P6S, can produce totally different results. However, increased error counts in some cases could indicate short life span for some burns, so there is still room for improvement here in a future firmware release. Delete the downloaded file and follow the steps in the Download the Firmware and Create an Upgrade Disc section to create a new upgrade disc Q: The firmware upgrade process is

According to the manufacturer's specs, the drive can read and write DVD-RAM media, at the maximum speed of 5X. BLER (Block Error Rate) is defined as the number of data blocks per second that contain detectable errors, at the input of the C1 decoder. After the download is complete, the upgrade starts and "VUP" appears on the player front panel display. Can't Burn Dvd Windows 10 The test discs we use are the ABEX series from ALMEDIO. - ABEX TCD-721R Errors total Num: 670241 Errors (Loudness) dB(A) Num: 38806 Avg: -73.2 dB(A) Max:-22.6 dB(A) Error Muting Samples

Step 1: Using a different type of disc If your computer cannot burn discs, try using a different type of disc. There Was A Problem Burning This Disc Windows 7 The message "Perform version update?" is displayed on the television. You must complete the next step before attempting to burn another disc. This is just a shot in the dark.Click to expand...

E21means two bad symbols were corrected in the C1 stage. Unable To Burn Cd In Windows 10 While the upgrade is installed the message "VUP */9" is displayed on the player front display. jake66, Nov 21, 2007 #10 sej7278 Well-Known Member James said: ↑ \DosDevices\E:\ -> USBSTOR\CdRom&Ven_Memorex&Prod_DVD+-RAM_510L_v1&Rev_MWS7\00101005050003PN&0 USB... Close Device Manager.

There Was A Problem Burning This Disc Windows 7

Ask the community! http://club.myce.com/f44/liteon-dvd-ram-drive-help-needed-shm-165p6s-182761/ WARNING!! Can't Burn Cd Windows 10 After you receive the disc, please see the Disc Upgrade Instructions section below, for more information. How To Burn A Cd On A Hp Laptop Please note that the posted results are only valid for the specific tested LiteON SHM-165P6S drive.

Since this is the most general measurement of the quality of a disc, you will find BLER graphs for all media tested below. Do not create the upgrade disc using any other process than the one described above. Discs with higher BLER are likely to produce uncorrectable errors. Note: The "*" changes to "0" through "9," indicating the upgrade progress. There Was A Problem Burning This Disc Windows 10

Protected Discs At this point, we will check the drive's ability to read and backup protected CDs. - AudioCD protections For the test procedure we used three audio discs with different The Plextor PX-716A with the latest available firmware. DVD Writing Quality - Page 4 In order to test the writing quality and readability of the burned media we used two readers with two software applications: The LiteON SOHD-167T with The measurements below should be taken not as the absolute criteria of the burning quality, but as an indication level. 8X DVD+R Writing Speed - BenQ 8X DVD+R @ 8X -

If you have questions or require assistance, please contact Sony Support at 1-866-909-SONY (7669). Can't Burn Cd Windows 8 Found & removed structural copy protection! The tracks are reproduced (played) through a software multimedia player (i.e.

Help Home Top RSS Terms and Rules All content Copyright ©2000 - 2015 MajorGeeks.comForum software by XenForo™ ©2010-2015 XenForo Ltd.

Z7_3054ICK0KGTE30AQO5O3KA3016 hp-feedback-input-portlet Actions ${title} Loading... Newer Than: Search this thread only Search this forum only Display results as threads Useful Searches Recent Posts More... If you didn't swap this in then ignore. Hp Dvd Burner Software If you have questions or require assistance, please contact Sony Support at 1-866-909-SONY (7669).

Newer Than: Search this thread only Search this forum only Display results as threads Useful Searches Recent Posts More... In the following graph we can see the recording times the LiteOn 1635S reported with various CD-R media inserted. Clicking on the image below, will open a larger, more detailed view. - Installation The drive was installed under WindowsXP and was recognized as "LITE-ON DVDRW SHM-165P6S ". The player may not be able to correctly read a dirty disc or a disc with scratches.

It's entirely possible that whatever optical drive you're using has riplock, which you may or may not be able to disable. After all CD/DVD writing software has been removed, restart the computer and reinstall the software. If you are using CD/DVD burning software that came with the computer, you can reinstall the software using HP Recovery Manager. Due to the fact that we overspeed the reading capabilities of the LiteON SOHD-167T, such drops are expected, especially near the outer area of the disc.

Together, all these bits of information provide a thorough analysis of disc quality. WARNING!! Due to the fact that we overspeed the reading capabilities of the LiteON SOHD-167T, such drops are expected, especially near the outer area of the disc. Confirm the deletion by clicking Yes.

The reader was the Plextor PX-716A (firmware v1.09). It also has 65 - 75 micrometer fingerprints. Note: If the last three digits of the version number are 014, the firmware upgrade was successful. Supported Media List With the aid of the LiteOn Flash Utility (LtnFlash 1.2.4) and Media Code Speed Edit, we were able to retrieve the drive's supported media list.

As for the RW speeds, the drive supports up to 8X for +RW and 6X for -RW media. Although the drive cannot overburn DVD media, it has plenty of other features. DVD Writing Quality - Page 2 In order to test the writing quality and readability of the burned media we used two readers with two software applications: The LiteON SOHD-167T with Click "OK" when the message "Burned Successfully" is displayed.The disc will be ejected.