It also may be due to a defective connection. The drive has not responded to the SMART test request. The computer successfully POSTs then says that it is starting up the SATA drivers... Replace the drive if the error repeats. check over here
Check cabling and retest. Check connections and retest. Replace the drive if the error repeats.
Return to Top Data Lifeguard Tools 11 and 10 Error Codes Note: If the same error code is encountered more than once after re-testing, please Contact Us for additional assistance. This may be due to a media error. This may be due to a defect with the drive or the drive may not have responded properly due to a bad connection. https://support.wdc.com/KnowledgeBase/answer.aspx?ID=654 and get an RMA if still in force.
Re-test Drive with appropriate diagnostic utility 205 Aborted By User Test was aborted by the user (Alt-X pressed during a test). ECC is a hardware correction technique that corrects errors. Check cabling & retest. Replace Drive 358 DAM 10+ Data Address Mark.
Replace the drive if the error repeats. http://www.motherboards.org/forums/viewtopic.php?t=104651 Re-test Drive 159 SMART Error Self-Monitoring, Analysis, and Reporting Technology (SMART) Error returned during SMART Status/Self Test Command. Check the device connections. Re-Test Drive 106 Track 0 Error Track 0 was not properly detected.
Regardless of how experienced you are in working on your computer, there will always be issues that will come your way. check my blog Retest after checking the connections. Replace the drive if the error repeats. Drive should be replaced.
Some vendors use the security feature to ensure the usage of only specific drives in their system, or the drive may have been locked by a user using a third party Retest. Post navigation Previous PostPast Tense Errors ExamplesNext PostSnoopy Errori Search for: Proudly powered by WordPress Benchmarks Hardware Community Support Store Forums Hall of Fame Register Remember Me? http://txtbl.com/western-digital/western-digital-hard-drive-error-code-0226.html The drive has not responded in the time allotted.
The drive is defective. sylvester Black Belt Posts: 559Joined: Tue Jul 27, 2004 4:17 am Top Reply with quote by webstaa » Fri Feb 08, 2008 2:07 pm it means that you have the Replace Drive 456 IDNF 1 Identified Data Not Found.
I used the WRONG version of the Lifeguard diagnostics to test the 6.4GB hard drive - I used the utility that was designed for drivers larger than 8.4GB! It might be clicking a little, but it's definitely not clicking continuously, as I understand drives tend to do when there's serious head failure.Once I persuaded the Ultimate Boot CD to failure and errors How to test a drive for problems using Data Lifeguard Diagnostics for Windows Where to download software, utilities, firmware updates, and drivers for WD products Processing... enabled help you monitor a drive's internal status through diagnostic commands.
Re-Test Drive 101 Unknown Error An unknown error has occurred during testing. Retest. It also may be due to a defective connection. http://txtbl.com/western-digital/western-digital-hard-drive-error-code-0223.html It also may be due to a defective connection.