Press F1 to resume. Ten or more instances of information on data positioning and location could not be found. You can test that disk (surface scan; I can show you how to do that in SMART) in advance, make sure it has no problems, then ship the bad one back Auto Offline Data Collection: Enabled. check over here
The drive may not have been accessed properly possibly due to a bad connection. But going forward the LBA is usable.The SMART error log indicates some of the LBAs which have encountered errors, but not all (because the error log is only so big/has limited Re-Test Drive 9 Write Sector Failure A write command during the test has failed. The new one is newer so it needed a new CPU and DDR3 RAM as well. https://support.wdc.com/knowledgebase/answer.aspx?ID=11711
Supports SMART auto save timer. Then I did a full media scan and after almost 2 hours I got : Too many errors found, please contact technical support, error/status code 0225 Then I proceeded to do Please re-test the drive with Data Lifeguard. I did do this with just the SATA drive connected but not both of them.Maybe it Acronis will give me access through a working drive with XP loaded?Back in a few...
Track 0 also holds information about the drive. Any suggestions? I'm sure they wouldn't take a hard drive just because of a few bad sectors. The drive has detected an unstable condition, possibly an incorrect spin speed.
The information file, which holds the data pertaining to this drive, is corrupted or missing. Canon Ir3300 Error Code 0007 Apr 25, 2008 #1 Rakinos [H]ard|Gawd Messages: 1,520 Joined: Jul 31, 2001 So I'm trying to fix a computer, that "stopped working" (endless reboot loop @ windows loading screen) when the Data Lifeguard Diagnostic for DOS (CD) Quick Test: Test Completed With Read Element Failure Error/Status Code: 0007 Extended Test: Too Many Errors Found - Please Contact Tech Support Error/Status Code: 0225 http://www.bleepingcomputer.com/forums/t/2520/how-did-i-get-infected/Forum Rules, The BC Welcome Guide 167 @ June 2015 Back to top #4 anonanon anonanon Topic Starter Members 141 posts OFFLINE Gender:Male Local time:04:26 AM Posted 16 February 2013
The drive may not have been accessed properly possibly due to a bad connection. I've been running these utilities: 1. In that situation, usually the best choice is to restore from backups. The same utility and the original code used to lock the drive are necessary to unlock this drive.
It may also happen when the wrong version of diagnostic utility is used. http://txtbl.com/western-digital/western-digital-hard-drive-error-codes.html drescherjm, Nov 10, 2010 drescherjm, Nov 10, 2010 #3 (You must log in or sign up to reply here.) Show Ignored Content Your name or email address: Do you already have It also may be due to a defective connection. Check Floppy and use appropriate diagnostic utility 209 Self Test Failed To Run SMART Self Test failed to start when executed.
This may be due to a defect with the drive or a bad connection. Retest the drive. Check cabling and retest. this content Extended self-test routine recommended polling time: ( 100) minutes.
Error: (10/03/2014 08:24:02 PM) (Source: ESENT) (User: ) Description: wuaueng.dll (3752) SUS20ClientDataStore: Error -1032 (0xfffffbf8) occurred while opening logfile F:\WINDOWS\SoftwareDistribution\DataStore\Logs\edb.log. Replace Drive 558 SERVO 10+ SERVO is data on track location. Re-Test Drive 257 ECC 2-9 Error Correction Code.
Retest and replace the drive if the error repeats. Not picking on you Dolphins, but I just don't understand why so many people refuse to do the one thing that could solve almost all of their problems. Re-Test Drive 258 ECC 10+ Error Correction Code. This may be due to a defect with the drive or a bad connection.
Replace the drive if the error repeats. I've sent drives to other people (see my profile, re: Kudos list) as well, so don't think I'm going to do something weird like show up at your house, haha. Suspend Offline collection upon new command. have a peek at these guys This may be an anomaly or a defect with the drive.
Um, thanks for the insight so far guys. Error: (10/03/2014 10:13:26 AM) (Source: Microsoft Antimalware) (User: ) Description: The support for your operating system has expired. Replace Drive 587 Bad Sector The previous relocation of a sector has failed. Replace the drive if the error repeats.
Replace Drive 218 10+ SERVO Errors SERVO 10+. No matter how I set the jumpers the SATA boots first. I hope the owner can come up with a copy of Windows XP home. Re-test with appropriate diagnostic utility 228 DRIVE IS LOCKED-DST FAIL Security feature of the drive reports locked status.
Offline surface scan supported. Replace drive if unable to correct error 120 NO DRIVE FOUND Cannot communicate with drive. Error: (08/20/2014 03:02:59 PM) (Source: ESENT)(User: ) Description: wuaueng.dll768SUS20ClientDataStore: F:\WINDOWS\SoftwareDistribution\DataStore\Logs\edb.log-1032 (0xfffffbf8) Error: (08/20/2014 03:02:59 PM) (Source: ESENT)(User: ) Description: wuauclt768F:\WINDOWS\SoftwareDistribution\DataStore\Logs\edb.log-1032 (0xfffffbf8)32 (0x00000020)The process cannot access the file because it is being Drive should be replaced.
Error: (10/04/2014 09:53:32 AM) (Source: Microsoft Antimalware) (User: ) Description: The support for your operating system has expired. Computers with S.M.A.R.T. Computer Help Jul 1, 2016 Your name or email address: Do you already have an account? Drive Reliability Monitor.
I have some spare 3.5" drives laying around; I could send you one for free. The drive has not responded back in the time allotted. Processing media-specific event for [explorer.exe!ws!] Error: (08/20/2014 03:03:09 PM) (Source: ESENT) (User: ) Description: wuaueng.dll (768) SUS20ClientDataStore: Error -1032 (0xfffffbf8) occurred while opening logfile F:\WINDOWS\SoftwareDistribution\DataStore\Logs\edb.log. Re-Test Drive 107 Check Sum Error Accumulated test data on the drives is corrupted.
Replace the drive if the error repeats. I ran the SMART diagnostics (extended test) and got the results below. Re-test Drive 134 Busy Timeout Timeout from checking busy bit.