Home > Western Digital > Western Digital Error Status Code 0104

Western Digital Error Status Code 0104

I've tried it on different ports (should be one from each controller now). The automatic repair feature can attempt a repair if possible. Single BIOS beep, then slave hard drive disappears. Replace Drive 208 SMART status failed after the media scan. check over here

It also may be due to a defective connection. Self-Monitoring, Analysis, and Reporting Technology (SMART). By the way, I am not a native English speaker and I am still learning English, so I cannot be very clear some times. There were too many errors found on this drive to be repaired.

Corruption may occur." Source: ATAPI "The driver has detected that device \Device\Ide\IdePort2 has old or out-of-date firmware. Check cable and retest. EDIT: These are the captures of the two error messages that I got when I mount the bad HDD connected via SATA on Ubuntu: What should I do now? Upon reboot I get a black DOS screen telling me that windows failed to start.

At least ten ECC errors have been detected. I've tried it on different SATA ports, I'll try a different data cable next, but I used a brand new one, so it seems odd it would be defective. Replace Drive 209 Previous Error Code not found Data Lifeguard Diag could not determine a previous error code. Re-test with appropriate diagnostic utility 0001 - 0008, 0015 SMART Error Self-Monitoring, Analysis, and Reporting Technology (SMART) Error returned during SMART Status/Self Test Command.

Replace the drive if the error repeats. Create and use a new DLG Tools diskette. Re-test Drive 201 Non-WD Drive The drive does not have a WD serial number. Re-test Drive 159 SMART Error Self-Monitoring, Analysis, and Reporting Technology (SMART) Error returned during SMART Status/Self Test Command.

Which I appreciate being able to do here. Check cables, make sure it is dusted off. Replace the drive if the error repeats. Replace Drive 218 10+ SERVO Errors SERVO 10+.

I am wondering whether the disk really is broken though as I can satill run I have run the WD diagniostics after creating a bootbale floppy and got the messaage "DRIVE Thank you in advance. ECC is a hardware correction technique that corrects errors. Replace Drive 256 ECC 1 Error Correction Code.

Re-Test Drive 100 Errors Found A Read or Write command during the test has failed. check my blog Replace Drive 210 Self Test Incomplete SMART Self Test failed to complete (e.g. -- timed out). As for Linux running from the CD it is just mostly running from the CD/RAM but if it will see the drive and somewhat access it, then try backing up any This brought the machine to its knees.

Twoboxer a b G Storage 8 September 2009 08:39:51 Tough to say lol. Share this post Link to post Share on other sites Elohssa 0 Member Member 0 12 posts Posted March 21, 2011 · Report post Ok, TSullivan. Replace the drive if the error repeats. this content If ECC occurs, use Data Lifeguard for additional error correction.

After that episode that HDD is bad. Please contact the system vendor for the above-mentioned information. All rights reserved.

This error may also appear if the floppy has been infected by a hidden virus.

Re-Test Drive 20 Failed to Delete Partitions A Device I/O Control command during the test has failed. I have a sense of deja vu . . .) templetonpeck 7 September 2009 15:05:29 Second SATA drive is new. Re-Test Drive 17 Erase SSD Failure A write command during the test has failed. Re-Test Drive with latest diagnostic utility 117 Uncorrectable ECC Error Uncorrectable Error Correction Code (ECC) Error.

If ECC occurs, use Data Lifeguard repair option for additional error correction. Replace Drive 200 Drive Not Tested Supported WD drives are initialized with this status. It also may be due to a defective connection. have a peek at these guys Sign in to follow this Followers 1 Is this HDD dead?

Then I presume I should reformat the drive and start over. Check connections and retest. Share this post Link to post Share on other sites Elohssa 0 Member Member 0 12 posts Posted March 20, 2011 (edited) · Report post It would be the same Further errors indicate a defective drive.

This error may also be related to memory issues. The drive should now be defect free. Retest after checking the connections.