Replace drive if unable to correct error 120 NO DRIVE FOUND Cannot communicate with drive. Western Digital... The printer may not be attached or turned on. Check connections and retest. http://txtbl.com/western-digital/western-digital-error-status-code-0201.html
Re-Test Drive 10 Set File Pointer Error A SetFilePointer command during the test has failed. The printer may not be attached or turned on. Acción en curso... XP SP3 w/all of the latest MS updates. https://support.wdc.com/knowledgebase/answer.aspx?ID=11711
Re-Test Drive 12 Too Many Bad Sectors Detected Error count reached a threshold value. You may need to rescan to ensure that the repairs were effective. and S.M.A.R.T. Check cable and retest.
This may be due to a media or read/write error. Please ensure that you are not loading any other DOS level files from the floppy prior to running diagnostic utility. Re-test 132 Command Error Command Aborted. http://www.techsupportforum.com/forums/f10/non-wd-drive-error-code-0201-a-151888.html DIY Perks 3.456.226 visualizaciones 10:28 Recover Data HHD hard drive from broken external Western Digital mybook enclosure repair solution - Duración: 13:01.
I formatted(Write Zero) device with WD Diagnostic Tool(9 Hour) in DOS and HDD Low Level Format Tool 4 Question about 2TB WD ELEMENTS USB 20DESKTOP EXTERNAL 35IN 1 Answer What does I've barely had it a week (6 days, MAYBE 7).http://www.newegg.com/Product/Product.aspx?Item=N82E16822136320&cm%5Fre=western%5Fdigital%5Fcaviar%5Fblack-%5F-22-136-320-%5F-ProductThere's the link to the product.So when you go to reformat, and you entirely format your drive, does it identify your hard This may be due to an internal error or to a failed connection which did not allow the interrupt command to be sent to the drive properly. The drive has failed and must be replaced.
The drive is defect free. useful source Replace the drive if the error repeats. How many drives do you have. GTX 680 High temps $1200 for 1 of these 3 options [SOLVED] Internal HD Used as External HD Job interview Clinton's (hacked) e-mail Server Video streaming on smarttv No WMA both
Drive Reliability Monitor. http://txtbl.com/western-digital/western-digital-dlgdiag-error-codes.html Re-Test Drive 258 ECC 10+ Error Correction Code. Check cable and retest. If the errors continue, replace the drive.
Re-Test Drive 108 Seek Not Complete A Seek command did not complete in the time allotted. It also may be due to a defective connection. Return to Top Data Lifeguard Tools 5.22 for DOS Error Codes Note: If the same error code is encountered more than once after re-testing, please Contact Us for additional assistance. this content Self-Monitoring, Analysis, and Reporting Technology (SMART).
Make sure that your drive is properly connected to your PC. Check the device connections. Re-test Drive with appropriate diagnostic utility 202 Drive Not Supported Older Western Digital drives are not supported by the diagnostic utility version being used.
The cable is loose, broken, or not plugged in. Replace the drive if the error repeats. It is also possible to see this error on defective Western Digital drives. Re-Test Drive If an error code is encountered that is not in the list above, please Contact Us for additional troubleshooting.
Replace Drive 358 DAM 10+ Data Address Mark. Re-test Drive with appropriate diagnostic utility 204 Missing Log File The log file that existed at startup of diagnostic utility has been moved or no longer exists. It also may be due to a defective connection. http://txtbl.com/western-digital/western-digital-error-codes.html Cargando...
Replace Drive 3 SMART Attribute Read Failure Self-Monitoring, Analysis, and Reporting Technology (SMART) attribute read failure. Re-Test Drive 17 Erase SSD Failure A write command during the test has failed. Ensure that you are using the latest version of diagnostic utility and that your cable is in good working condition. Drive should be replaced.
Drive should be replaced. Please re-test the drive with Data Lifeguard. scooter99tube 165.746 visualizaciones 12:22 Cargando más sugerencias... Further errors indicate a defective drive.
The command set to be executed has timed out. All Rights Reserved.