Replace the drive if the error repeats. western digital data lifeguard error code 0007 || manual Dlgdiag Error Code -... No, create an account now. Set the boot order to boot from cd first,had cd in drive,booted up, and the diagnostic gave me this error message: No Drive Found/ Error Status Code 0120 Press any key check over here
This may be due to an internal error or to a failed connection which did not allow the interrupt command to be sent to the drive properly. This error may also appear if the floppy has been infected by a hidden virus. Replace the drive if the error repeats. Retest. https://support.wdc.com/knowledgebase/answer.aspx?ID=11711
Please ensure that you are using the appropriate version of diagnostic utility. The failure to complete the test indicates a failed drive. to report if a drive has failed, it must be enabled as a system option.
There may be repairable media errors on a platter. This error may also appear if the floppy has been infected by a hidden virus. The same utility and the original code used to lock the drive are necessary to unlock this drive. https://community.wd.com/t/data-lifeguard-diagnostic-for-dos-working-os-but-no-drive-found/15260 Re-test Drive 206 Memory Allocation Error Unable to allocate memory for program structures.
Replace Drive 227 SMART Not Supported Self-Monitoring, Analysis, and Reporting Technology (SMART) Certain older drives do not support SMART. Doing so should cost no more than $60. Re-Test Drive 103 Write Fault Error A Write command during the test has failed to complete. Apr 9, 2008 20g hard primary drive sec 40g hard drive b, May 28, 2008, in forum: Windows XP General Replies: 4 Views: 292 John May 28, 2008 Xcopy - can
Replace the drive if the error repeats. http://www.bleepingcomputer.com/forums/t/317168/recently-slowing-pc-now-wont-start-properly/ Re-test Drive 142 TK-TK SEEK ERROR Error encountered during track-to-track seek. Last year I had > Win98 and sometimes if would freeze in mid operation and > show me a blue screen with " No C: Drive Found". nothing was happening.
Replace Drive 458 IDNF 10+ Identified Data Not Found. The information file, which holds the data pertaining to this drive, is corrupted or missing. Create and use a new DLG Tools diskette. http://txtbl.com/western-digital/western-digital-error-status-code-0120.html Then download the Western Digital Diagnostics and run on the drive.
celina728 Member Messages: 147 I download the iso/diagnostic test for my HD onto a cd. Re-Test Drive 121 Servo Error Servo error. Retest the drive.
Replace Drive 163 Unknown Error Queued command timed out. Retest after checking the connections. Replace Drive 216 10+ IDNF Errors Identified Data Not Found (IDNF) 10+. So it would seem that the hard disk is definitely poorly, but not yet dead.
No, create an account now. The drive has to be replaced. Re-test Drive 159 SMART Error Self-Monitoring, Analysis, and Reporting Technology (SMART) Error returned during SMART Status/Self Test Command. http://txtbl.com/western-digital/western-digital-error-0120.html It also may be due to a defective connection.
Replace Drive 358 DAM 10+ Data Address Mark. Guest Guest I have purchased 40Gig Western Digital hard drive two years ago in CompUSA and for the past year I had a problem with it. The drive should now be defect free. Re-test Drive with appropriate diagnostic utility 205 Aborted By User Test was aborted by the user (Alt-X pressed during a test).
installation guide / western digital data lifeguard error code 0007 ... Ten or more instances of information on data positioning and location could not be found. of updates to install.Will return either late tonight or tommorow. Drive should be replaced.
Re-test Drive 134 Busy Timeout Timeout from checking busy bit. This may be due to a defect with the drive or the drive may not have responded properly due to a bad connection. Check cabling & retest. X-out to close result window.
Replace Drive 584 Diag Command Error During a Quick Test, the sefl-test failed. Replace the drive if the error repeats. Check cabling & retest. X-out to close result window.
Retest after checking the connections.