Home > Western Digital > Western Digital Error Code 007

Western Digital Error Code 007

yes, the power keeps fluctuating a lot, here, and, I don't have a UPS or a line conditioner/surge protector connected, either. Replace Drive 585 Busy Timeout During a read verify, a command could not be completed. Re-Test Drive 6 SMART Diagnostic Self-Test (DST) Failure Self-Monitoring, Analysis, and Reporting Technology (SMART) Self-Test Command failed. Drive should be replaced. check over here

Check cable & retest. System_Memory Test failure Random Hard Drive Failure Opinion on what went wrong (PSU failure) Media Test Failure- Check Cable Video failure? Retest after checking the connections. Replace the drive if the error repeats. https://support.wdc.com/knowledgebase/answer.aspx?ID=11711

Replace Drive 217 2-9 SERVO Errors SERVO 2-9. You never know when one will leave you. Drive should be replaced. Please ensure that you are not loading any other DOS level files from the floppy prior to running diagnostic utility.

Replace the drive if the error repeats. Replace the drive if the error repeats. daringjoe, see above edit. On my desk I have a workstation..." - William Faulkner Reply With Quote September 9th, 2008,11:19 AM #7 Train View Profile View Forum Posts Site Moderator Join Date Apr 2000 Location

It's a 640Gb drive... Replace the drive if the error repeats. Help me diagnose my hardware failure Test RAID 1 on non hot-pluggable sata hard disks Base 64 K memory failure-Best way to test? Replace the drive if the error repeats.

Non-WD drives are not supported. Check Floppy and use appropriate diagnostic utility 207 Critical Resource Error Unable to locate and/or use a system resource (e.g. - printer). Board index The team • Delete all board cookies • All times are UTC [ DST ] Powered by phpBB Forum Software © phpBB GroupStyle by Marc Alexander © x FAQ Replace the drive if the error repeats.

Re-Test Drive 2 SMART Attribute Over Threshold Self-Monitoring, Analysis, and Reporting Technology (SMART) threshold exceeded condition. useful reference Back to top #35 marija_peg marija_peg Topic Starter Members 128 posts OFFLINE Gender:Female Local time:10:27 AM Posted 14 April 2013 - 03:12 AM I tried the extended scan and after Several instances of track information could not be found. It is possible that my notebook is still under warranty (I'm still not sure if it was 12 or 24months) so I could get a new HD for free...

This may be due to an internal error or to a failed connection which did not allow the interrupt command to be sent to the drive properly. check my blog This may be due to a media or read/write error. Replace Drive 200 Drive Not Tested Supported WD drives are initialized with this status. Yes, the drive works but then comes up with problems that I've mentioned in my very first post.

No Errors 100 No Errors Found Successful operation. This may be due to a media error. The automatic repair feature can attempt a repair if possible. this content Please re-test the drive with Data Lifeguard.

Replace the drive. The drive is defect free. to report if a drive has failed, it must be enabled as a system option.

Ten or more instances of information on data positioning and location could not be found.

Check the device connections. Please ensure that you are using the version of diagnostic utility corresponding to either newer or older Western Digital drives. Several instances of information on data positioning and location could not be found. You may need to rescan to ensure that the repairs were effective.

Top Keatah Post subject: Re: WD5000AAKX-001CAO Caviar Blue slow sectors issuePosted: June 26th, 2012, 15:29 Joined: April 26th, 2012, 1:52Posts: 388Location: Chicago, USA michael chiklis wrote:I backup all Re-test 132 Command Error Command Aborted. Re-Test Drive 121 Servo Error Servo error. have a peek at these guys Forum Today's Posts FAQ Calendar Forum Actions Mark Forums Read Quick Links View Forum Leaders What's New?

Check Floppy and use appropriate diagnostic utility 209 Self Test Failed To Run SMART Self Test failed to start when executed. Re-test Drive 150 UNKNOWN ERROR An unknown error has occurred during testing. If you boot into the BIOS, is the drive seen? Drive should be replaced.

In order for S.M.A.R.T. Please re-test the drive with Data Lifeguard. Please re-test the drive with Data Lifeguard. Re-Test Drive 107 Check Sum Error Accumulated test data on the drives is corrupted.

Replace the drive if the error repeats. If you accept cookies from this site, you will only be shown this dialog once!You can press escape or click on the X to close this box. The cable is loose, broken, or not plugged in. Replace the drive if the error repeats.

Check connections and retest. When a failure is anticipated by S.M.A.R.T., the user may choose to replace the drive to avoid unexpected outage and data loss. Re-test Drive 137 Relocated Sector Sector Relocated. Retest.

is it going to die??thanksHarry 3 answers Last reply Aug 19, 2010 More about dlgdiag code failed read test element failure jscAug 19, 2010, 12:00 PM http://www.wdc.com/en/library/other/2779-701022.pdf hjmxAug 19, 2010, 12:52 The drive may not have been accessed properly possibly due to a bad connection. Replace the drive if the error repeats. Please link to a site.