Home > Western Digital > Western Digital Error 0212 Code

Western Digital Error 0212 Code

Replace Drive 216 10+ IDNF Errors Identified Data Not Found (IDNF) 10+. Replace Drive 200 Drive Not Tested Supported WD drives are initialized with this status. Retest after checking the connections. This may be due to a media or read/write error. check over here

Retest the drive. Check cable and retest. Replace Drive 223 Errors Repaired Errors found, but have been repaired successfully. Re-Test Drive 203 DRM Attribute too low beforemedia scan. More Help

and S.M.A.R.T. Retest after checking the connections. Replace the drive if the error repeats. If it still reads an error it may be bad or going bad.

Re-Test Drive 19 SMART Enabled Operation Failure Self-Monitoring, Analysis, and Reporting Technology (SMART) Enable Operation failed. Several instances of information on data positioning and location could not be found. Check connections and retest. Ten or more instances of information on data positioning and location could not be found.

Replace the drive if the error repeats. Retest. This may be due to a media or read/write error. This error may also be related to memory issues.

ReplaceDrive 580 Missing Interrupt An interrupt request failed during the test process. Replace drive if unable to correct error 118 DAM Error Data Address Mark (DAM) Error. Replace. Re-Test Drive 102 Seek Timeout A Seek command did not complete in the time allotted for its completion.

Re-Test Drive 11 Cable Test Failed Failure during cable test. A number of ECC errors (between 2 through 9) have been detected. Check cabling & retest. Retest after checking the connections.

All Rights Reserved. check my blog It also may be due to a defective connection. Drive should be replaced. Some vendors use the security feature to ensure the usage of only specific drives in their system, or the drive may have been locked by a user using a third party

Drive should be replaced. Drive should be replaced. The same utility and the original code used to lock the drive are necessary to unlock this drive. this content Re-Test Drive 8 Read Sector Failure A Read command during the test has failed.

Replace Drive 456 IDNF 1 Identified Data Not Found. After that i tested my drive using Diagnostics from WD Smartware. Sorry but can anyone please let me know how can i Cancel my current RMA and Regenarate a new one.

Re-Test Drive 110 DRQ NOT EXPECTED The drive did not properly respond to test commands.

Please rate the helpfulness of this answer Answers others found helpful Understanding S.M.A.R.T. Re-Test Drive 108 Seek Not Complete A Seek command did not complete in the time allotted. This may be an anomaly. Re-Test Drive 210 Self Test Failed The drive's internal self-test reported unrepairable errors.

Re-Test Drive 105 BUSY GLITCH The drive did not properly respond to test commands. This may be due to a media error. Replace the drive if the error repeats. have a peek at these guys This may be due to a media or read error.

Ten or more instances of track information could not be found.