Home > Western Digital > Western Digital Error 0132

Western Digital Error 0132

Drive should be replaced. Re-Test Drive 19 SMART Enabled Operation Failure Self-Monitoring, Analysis, and Reporting Technology (SMART) Enable Operation failed. I have a WD3200JB 00KFA0 (IDE hard drive). LOL. check over here

That error code means "test with the proper diag. Retest after checking the connections. In your BIOS settings you can disable the bootup logo then you can see what it's sitting on for so long. Thanks for the help. https://support.wdc.com/knowledgebase/answer.aspx?ID=11711

Drive should be replaced. Data Lifeguard tool I think. (I downloaded it to another pc) and it told me that the test could not be done because of a cable error. (I forget the exact I got home and tried it out and same thing.... Replace the drive if the error repeats.

So, I was getting frustrated but still had the feeling that there was just a small problem that needed to be fixed. Re-Test Drive 16 Random Read Error A read command during the test has failed. At this point, probably nothing to lose trying it. "Optimism, pessimism, fuck that; we're going to make it happen. I am not a techie but I can get into my hard drive area using either ERD Commander or using the Seagate and now the WD Diagnostic Data Lifeguard solutions.

Guess what I am saying is, and this happened around 6 months ago with the computer I am typing on. Please contact the system vendor for the above-mentioned information. Track 0 also holds information about the drive. http://www.techsupportforum.com/forums/f16/solved-what-is-error-status-code-0132-from-data-lifeguard-diagnostics-537960.html Free tech support, motherboard ID, and more.

ECC is a hardware correction technique that corrects errors. Top Jorpho Posts: 5992 Joined: Wed Dec 12, 2007 5:31 am UTC Location: Canada Re: Diagnosing a Kaput WD External Hard Drive Quote Postby Jorpho » Fri Dec 02, 2011 2:47 Replace the drive if the error repeats. The cable is loose, broken, or not plugged in.

Re-test with appropriate diagnostic utility 222 Drive Failed the Test Self-Monitoring, Analysis, and Reporting Technology (SMART) Error returned during SMART Status/Self Test Command. http://tomdownload.net/software/western-digital-error-status-code-0132/ If ECC occurs, use Data Lifeguard repair option for additional error correction. There were media errors that were within the repair capabilities of diagnostic utility. The drive has not responded in the time allotted.

Replace. check my blog Re-Test Drive 112 IRQ Timeout Interrupt ReQuest Interrupt signal not received. Re-test Drive with appropriate diagnostic utility 202 Drive Not Supported Older Western Digital drives are not supported by the diagnostic utility version being used. An interrupt command to perform a specific task failed to complete.

Retest. It also may be due to a defective connection. Check connections and retest. this content The diagnostics are successful; they complete really quickly.The funny thing is that at bootup (i.e.

Forster (1909)Barry Schwartz TED Talk: "The Paradox of Choice" (Featuring the True Secret to Happiness) Top yewbie Posts: 208 Joined: Mon Sep 13, 2010 6:35 pm UTC Re: Diagnosing a Kaput Ten or more instances of track information could not be found. Thank you in advance for any responses.

Track 0 on the drive must be accessed to perform parts of various internal tests.

This may be due to a media or read/write error. At that point it was still recognized on device manager but not in disk management. Just in case you like to try fixing errors, try the following problems and check if you could fix them with the tips below. WD Internal Drives Desktop & Mobile Drives psongman 2011-11-20 07:59:20 UTC #1 HI, I am sure this has been mulled over a few times here but I can't narrow down the

Please re-test the drive with Data Lifeguard. Replace Drive 214 10+ DAM Errors Data Address Mark (DAM) 10+. Some vendors use the security feature to ensure the usage of only specific drives in their system, or the drive may have been locked by a user using a third party have a peek at these guys Forster (1909)Barry Schwartz TED Talk: "The Paradox of Choice" (Featuring the True Secret to Happiness) Top yewbie Posts: 208 Joined: Mon Sep 13, 2010 6:35 pm UTC Re: Diagnosing a Kaput

Check cabling and retest. Quick response time. Re-Test Drive 586 DRQ Timeout Data ReQuest Timeout. Non-WD drives are not supported.

If you got 2 dead HD useless, and identical (20GB, per exempple), you could train yourself swapping heads without the need of a clean room. Replace the drive if the error repeats. The drive has not responded back in the time allotted. If ECC occurs, use Data Lifeguard repair option for additional error correction.

This may be due to a defect with the drive or a bad connection. I pulled up a command prompt and I accessed the "C" drive, but it was a false positive. It may also be due to a defective connection. Replace Drive 550 Abort Cmd Abort Command.

This may be an anomaly or a defect with the drive. Re-Test Drive 106 Track 0 Error Track 0 was not properly detected. There may be repairable media errors on a platter. The great thing to do is open the computer in safe mode so that you can uninstall the software recently added, also take away any hardware devices linked to it.

Check cable & retest. Back to top hddstudioDeadharddrive regular +1Joined: 30 Mar 2007Posts: 33Location: Jakarta - Indonesia Posted: Wed Mar 25, 2009 11:49 am Post subject: Tof wrote: You might have a faulty head. Replace the drive if the error repeats. Re-test Drive 144 THIRD STROKE ERROR Error encountered during 1/3 stroke seek.