Home > Western Digital > Western Digital Diagnostics Error Code 223

Western Digital Diagnostics Error Code 223

Contents

You have to be very patient, the quick type scan came up fast with an error (0132)  then wouldn't let me do anything else. SERVO is data on track location. Please confirm it is AAJB. I've recently written zeros to the drive as it repeatedly gave the 'read error' and the 'bad sectors' error in Windows(happens once in every two-three weeks after fixing the 'read error', check over here

A clicking noise can indicate that this error has occurred. Re-test Drive with appropriate diagnostic utility 133 Illegal ID FW overlay not found. Transparent Auto RElocate. I noticed this new drive doesn't come with any ribbon cable. https://support.wdc.com/knowledgebase/answer.aspx?ID=11711

Western Digital Error Codes

Rick P. There may be repairable media errors on a platter. Re-test Drive 220 Drive is Locked Security feature of the drive reports locked status. Retest.

Reseating ALL connectors and even PC cards would be a good thing to try. Retest after checking the connections. Re-Test Drive 103 Write Fault Error A Write command during the test has failed to complete. Further errors indicate a defective drive.

Re-test Drive 135 DRQ Timeout Timeout from checking Data ReQuest Timeout (DRQ) bit. acrufox 2011-03-15 11:22:37 UTC #6 Can this be used to RMA the drive? Retest after checking connections. https://community.wd.com/t/wd20ears-00s8b1-strange-smart-behavior/14205 Re-test Drive with appropriate diagnostic utility 133 Illegal ID FW overlay not found.

Replace the drive if the error repeats. Drive should be replaced. Re-test with appropriate diagnostic utility 222 Drive Failed the Test Self-Monitoring, Analysis, and Reporting Technology (SMART) Error returned during SMART Status/Self Test Command. Check your floppy and retest.

Western Digital Error Code 0007

Please re-test the drive with Data Lifeguard. Replace Drive 3 SMART Attribute Read Failure Self-Monitoring, Analysis, and Reporting Technology (SMART) attribute read failure. Western Digital Error Codes The cable is loose, broken, or not plugged in. Are you using a 40 or 80 conductor cable?

ECC is a hardware correction technique that corrects errors. check my blog Check Floppy and use appropriate diagnostic utility 209 Self Test Failed To Run SMART Self Test failed to start when executed. Replace the drive if the error repeats. This error may also be related to memory issues.

Please ensure that you are using the version of diagnostic utility corresponding to either newer or older Western Digital drives. Retest the drive with Data Lifeguard. Several instances of track information could not be found. this content WD Internal Drives Desktop & Mobile Drives psongman 2011-11-20 07:59:20 UTC #1 HI, I am sure this has been mulled over a few times here but I can't narrow down the

In the title you said AJB. This may be due to a defect with the drive or the drive may not have responded properly due to a bad connection. Replace Drive 217 2-9 SERVO Errors SERVO 2-9.

Replace Drive 211 2-9 Uncorr ECC Errors Error Correction Code (ECC) 2 through 9.

The printer may not be attached or turned on. Re-test Drive 134 Busy Timeout Timeout from checking busy bit. This may be due to a defect with the drive or the drive may not have responded properly due to a bad connection. Drive should be replaced.

Replace. Ten or more instances of track information could not be found. Replace the drive if the error repeats. have a peek at these guys Re-test Drive 135 DRQ Timeout Timeout from checking Data ReQuest Timeout (DRQ) bit.

Replace Drive 13 Failed to Repair Sector A test failed to repair bad sectors. Replace the drive. So yeah, its normal.. Re-test Drive 159 SMART Error Self-Monitoring, Analysis, and Reporting Technology (SMART) Error returned during SMART Status/Self Test Command.

in that case, there's something else wrong... Replace the drive if the error repeats. Please rate the helpfulness of this answer Answers others found helpful Understanding S.M.A.R.T. Please contact the system vendor for the above-mentioned information.

You may need to rescan to ensure that the repairs were effective. Re-Test Drive 115 ICRC Error Ultra DMA CRC error. Reports: · Posted 5 years ago Top Mike1030 Posts: 1021 This post has been reported. Several hours later I came back to smart again reporting both pending and uncorrectable sectors values of 3 each, as well as a new value of 5 under write error rate.¬†

Has this drive ever worked?