Home > Western Digital > Western Digital Diagnostics Error 0223

Western Digital Diagnostics Error 0223

Upon reboot. Turns out DVD's don't work because the thing is so old it lacks a DVD player. Replace the drive if the error repeats. It also may be due to a defective connection. check over here

The drive is defect free. Video card is a 9800GT. Replace Drive 214 10+ DAM Errors Data Address Mark (DAM) 10+. Retest after checking the connections. https://support.wdc.com/knowledgebase/answer.aspx?ID=11711

I installed the latest official 260.89 drivers and selected clean install. Thanks for listening, now to make some music, DR Home Categories FAQ/Guidelines Terms of Service Privacy Policy Powered by Discourse, best viewed with JavaScript enabled Support Downloads Knowledge Base German Spanish If the errors continue, replace the drive.

Backed up all my data and put in a request for a new hard drive. One instance of track information could not be found. Scared to log off or reboot now. The drive has not responded in the time allotted.

Replace the drive if the error repeats. Re-test Drive 150 UNKNOWN ERROR An unknown error has occurred during testing. Re-test Drive with appropriate diagnostic utility 202 Drive Not Supported Older Western Digital drives are not supported by the diagnostic utility version being used. The drive has not responded back in the time allotted.

Please re-test the drive with Data Lifeguard. This condition occurs when the device's SMART reliability status indicates an impending degrading or default condition. Create and use a new DLG Tools diskette. This may be due to a media or read/write error.

Rakinos, Apr 25, 2008 Rakinos, Apr 25, 2008 #1 Nov 10, 2010 #2 Cerulean [H]ardForum Junkie Messages: 9,260 Joined: Jul 27, 2006 New Western Digital Blue 160GB IDE HDD and I Re-Test Drive 10 Set File Pointer Error A SetFilePointer command during the test has failed. Replace the drive if the error repeats. Check connections and retest.

There could be media errors present on this drive. http://txtbl.com/western-digital/western-digital-diagnostics-error-0226.html Retest after checking the connections. The drive has not responded in the time allotted. Re-test Drive 206 Memory Allocation Error Unable to allocate memory for program structures.

Retest the drive. It also may be due to a defective connection. This may be due to a media error. this content May need to run DLGUDMA to set the drive to a slower speed or replace the IDE cable.

This may be an anomaly or a defect with the drive. This may be due to a media error. Test complete Defect Fre that you can find it in Link:  http://support.wdc.com/techinfo/general/errorcodes.asp?lang=en#v10 and going back to you error, they way i see it, you could try the hdd in another system

Replace Drive 219 Drive Cable Error Failure during cable test.

Non-WD drives are not supported. Check cabling and retest. Replace Drive 217 2-9 SERVO Errors SERVO 2-9. Re-test Drive 135 DRQ Timeout Timeout from checking Data ReQuest Timeout (DRQ) bit.

Re-test Drive 213 2-9 DAM Errors Data Address Mark (DAM) 2-9. Re-test Drive 148 Not Selected Drive not selected. Replace the drive if the error repeats. http://txtbl.com/western-digital/western-digital-error-code-0223.html Replace Drive 558 SERVO 10+ SERVO is data on track location.

Return to Top In case the answer did not answer your question, you can always visit the WD Community for help from WD users. Replace the drive if the error repeats. iMac just got some real competition... [Apple] by HiVolt261. This may be due to an internal error or to a failed connection which did not allow the interrupt command to be sent to the drive properly.

Check cabling and retest. Ten or more instances of information on data positioning and location could not be found. This error can occur on non-Western Digital drives. Track 0 on the drive must be accessed to perform parts of various internal tests.

I backed up the contents of the drive to another system and booted up dlgdiag and did an extended test. An onboard defect counter has determined the drive has too many errors and should be replaced. Replace Drive 584 Diag Command Error During a Quick Test, the sefl-test failed. Replace Drive 227 SMART Not Supported Self-Monitoring, Analysis, and Reporting Technology (SMART) Certain older drives do not support SMART.

This may be due to a media error.