Home > Wd Error > Wd Error 0226

Wd Error 0226

Replace Drive 211 Self Test Never Completed The drives internal self-test could not complete due to unrepairable errors. wait couple minutes to cool down harddrive. Replace Drive 219 Drive Cable Error Failure during cable test. Replace the drive if the error repeats. http://txtbl.com/wd-error/wd-error-status-code-0226.html

The drive has to be replaced. Drive should be replaced. This may be due to a media or read/write error. It may also be due to a defective connection.

Replace Drive 215 2-9 IDNF Errors Identified Data Not Found (IDNF) 2-9. Replace the drive if the error repeats. Suggestion: www.retrodata.co.uk. ok, he returns that one, he gets another one(anopther shop) msi, this time.

Check cable & retest. The drive has to be replaced. tomaszSep 6, 2009, 1:10 AM I got WD Raptor X and this happened to me twice already.once system froze and then after startup drive was not recognized as a system drive. Re-Test Drive 19 SMART Enabled Operation Failure Self-Monitoring, Analysis, and Reporting Technology (SMART) Enable Operation failed.

Re-Test Drive 17 Erase SSD Failure A write command during the test has failed. Likely it has run out of spares which is a very bad sign if the drive is relatively new. Then this happened...As for the Raptor, I'm definitely going to RMA it, I just don't know how to do it because I've never had to do that. https://community.wd.com/t/sector-relocation-error-code-0226/13529 Contact System Vendor 221 Test Not Supported Certain older drives do not support certain SMART Self Tests.

Any other ideas? We used it a couple of times during the evening. Replace the drive if the error repeats. It also may be due to a defective connection.

i_hate_flyingSep 5, 2009, 11:54 PM Hi, I just had something really odd happen to my main OS hard drive this evening. his explanation i_hate_flyingSep 6, 2009, 1:48 PM I just used a trial of Ontrack Professional. Re-test Drive If an error code is encountered that is not in the list above, please Contact Us for additional troubleshooting. KL-Seremban is not too far btw. « Next Oldest · Technical Support · Next Newest »

Top Close Topic Options Track this topic Receive email notification when a reply

Check your connections and replace the cable. Replace Drive 581 Write Fault When either writing zeros or relocating a sector, the Write command failed. The drive for games is a 500 Gb internal 7200.10. check the SMART to see if there are any reallocated sectors...if so, rma...if they accept that...heh washu 01-06-2010 01:28 PM Re: wd diag error message It means it found one or

I've been in this for 12 years and I have seen quality take a nosedive. This is the pretest initialization code which indicates a drive is ready to be tested, but has not yet been tested. Retest after checking the connections. If the error repeats, replace the drive.

Check Floppy and use appropriate diagnostic utility 209 Self Test Failed To Run SMART Self Test failed to start when executed. Replace Drive 584 Diag Command Error During a Quick Test, the sefl-test failed. It also may be due to a defective connection.

Because, if you do that with the unregistred version, nothing will be cloned: it does not write (to the destination disk).

Replace the drive if the error repeats. Check cable & retest. Re-Test Drive 9 Write Sector Failure A write command during the test has failed. I bought it from an authorized seller in the States/Canada, but I'm living permanently in Europe these days, so I'm not sure how that will work...?

ratdude747 01-07-2010 01:35 PM Re: wd diag error message well then no shit sherlock! (sorry, willa). Retest the drive. i_hate_flyingSep 6, 2009, 4:20 PM Oh man, I was finally able to boot into MiniPE in order to use the recovery tools. Replace Drive 357 DAM 2-9 Data Address Mark.

Are you cloning it? Replace the drive if the error repeats. It used to be I could build a computer that would be more stable than anything the likes of Dell could produce, for about the same money. Replace Drive 214 10+ DAM Errors Data Address Mark (DAM) 10+.

This error is most likely an internal malfunction of the drive and not related to the condition of the cables etc. Just because a sector has been reallocated does not mean that the data in the bad block it was successfully recovered, meaning every file you put on the disk is potentially If ECC occurs, use Data Lifeguard for additional error correction. Join them; it only takes a minute: Sign up Here's how it works: Anybody can ask a question Anybody can answer The best answers are voted up and rise to the

Hot Network Questions Coding Standard - haphazard application Understanding memory allocation for large integers in Python Produce Dürer's magic square Am I interrupting my husband's parenting? After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 61 46 00 00 00 40 Device Fault; Error: ABRT Replace Drive 550 Abort Cmd Abort Command. An error has been detected.

Did you try that?My suggestion at this point is, since the disk appears to be a real trouble maker and is known to be unreliable, to really consider your options: There as i am sure the cost of taking a raid drives to be recoved will be very exspencive even if i can wait.Thank You Logged Joep Developer and Support Tech Administrator