Home > Wd Error > Wd Error 0132

Wd Error 0132

Replace the drive if the error repeats. ECC is a hardware correction technique that corrects errors. Windows 7 Hi all, I got a boot disk failure error when restarting my PC. Re-Test Drive 103 Write Fault Error A Write command during the test has failed to complete. http://txtbl.com/wd-error/wd-error-code-0132.html

Retest after checking the connections. Re-test Drive 134 Busy Timeout Timeout from checking busy bit. M. Replace Drive 226 Sector Relocation Error Failure to relocate a sector during drive repair.

swapping "any" 20 Gb drives are not similar to swapping heads against WD drives. Fair to say the drive is probably u/s, but can't find any real info on exactly what the error is. The cable is loose, broken, or not plugged in. The Identify Drive Command has not received an acceptable response from the drive.

Check cabling and retest. Between two to nine errors have been detected. If the automatic repair feature is unable to repair these errors, replace the drive. Retest the drive with Data Lifeguard.

Re-test with appropriate diagnostic utility 222 Drive Failed the Test Self-Monitoring, Analysis, and Reporting Technology (SMART) Error returned during SMART Status/Self Test Command. Replace Drive 209 Previous Error Code not found Data Lifeguard Diag could not determine a previous error code. Return to Top Data Lifeguard Tools 11 and 10 Error Codes Note: If the same error code is encountered more than once after re-testing, please Contact Us for additional assistance. you could try here If the automatic repair feature is unable to repair these errors, replace the drive.

failure and errors How to test a drive for problems using Data Lifeguard Diagnostics for Windows Where to download software, utilities, firmware updates, and drivers for WD products Processing... This may be due to a defect. It may also happen when the wrong version of diagnostic utility is used. one that is booting from another, functioning drive), the SATA drive is recognized in the BIOS and even in the Windows device manager, but Windows cannot find any partitions on it.

Re-test with appropriate diagnostic utility 228 DRIVE IS LOCKED-DST FAIL Security feature of the drive reports locked status. http://www.motherboards.org/forums/viewtopic.php?t=104651 Replace Drive 223 Errors Repaired Errors found, but have been repaired successfully. I did the windows test from Western Digitals site. Replace Drive 587 Bad Sector The previous relocation of a sector has failed.

I'm really quite surprised Western Digital could get away with releasing such a shoddy product. Forster (1909)Barry Schwartz TED Talk: "The Paradox of Choice" (Featuring the True Secret to Happiness) Top think_of_a_shape Posts: 61 Joined: Mon Sep 04, 2006 11:30 pm UTC Location: United Kingdom Re: Quote Quick Navigation Other Hardware and Devices Top Site Areas Settings Private Messages Subscriptions Who's Online Search Forums Forums Home Forums Futuremark Products and Services Futuremark News and Announcements 3DMark - The drive has not responded to the SMART test request.

Re-Test Drive 9 Write Sector Failure A write command during the test has failed. Replace. If you got 2 dead HD useless, and identical (20GB, per exempple), you could train yourself swapping heads without the need of a clean room. his comment is here When I did a c:\dir it listed the contents of what was my F drive (secondary HDD).

Drive should be replaced. But I would wait until this get confirmed or not by someone more experienced. Replace the drive if the error repeats.

Replace Drive 358 DAM 10+ Data Address Mark.

Version 4.12 for older drives and version 5.00 for current drives. I guess that one isn't it. Retest the drive. Drive should be replaced.

It also may be due to a defective connection. Replace the drive if the error repeats. Top Jorpho Posts: 5992 Joined: Wed Dec 12, 2007 5:31 am UTC Location: Canada Re: Diagnosing a Kaput WD External Hard Drive Quote Postby Jorpho » Sat Dec 10, 2011 5:23 If I could take them out of mine and put them in a donor hard drive. (The one I bought from ebay.) Will it all work?

I thought that was an urban legend, or whatever the technological equivalent is.Nope, it's a real thing. This may be due to a media or read error. Data Lifeguard tool I think. (I downloaded it to another pc) and it told me that the test could not be done because of a cable error. (I forget the exact If the error repeats, replace the drive.

This may be due to a defect with the drive or the drive may not have responded properly due to a bad connection. This error may have internal and external reasons. This may be due to a defect with the drive or the drive may not have responded properly due to a bad connection. Or perhaps marry the attractive daughter of such a business owner.I thought I'd report that a chance to give SpinRite a chance recently presented itself, so I fired up a spare

Check connections and retest. to solve mankind's maladies.. This may be an anomaly. It does not seem to exist.Sorry ultimate boot cd actually loads ISO images of everything, for DLG it loads a ISO image of a bootable ms-dos floppy disk.UBCD is based off

Please rate the helpfulness of this answer Answers others found helpful Understanding S.M.A.R.T. I am curious on whether or not it would have made a difference that I did not format the hard drive before trying the pcb from it. (This was a new I thought that was an urban legend, or whatever the technological equivalent is. "The Machine Stops", by E. This may be due to a defect with the drive or a bad connection.

ECC is a hardware correction technique that corrects errors. Ten or more instances of track information could not be found. An onboard defect counter has determined the drive has too many errors and should be replaced. Replace the drive if the error repeats.

Retest after checking the connections.