Home > Fatal Error > Apcupsd Cannot Find Ups Device

Apcupsd Cannot Find Ups Device

Contents

ixe View Public Profile View LQ Blog View Review Entries View HCL Entries Visit ixe's homepage! Ubuntu Logo, Ubuntu and Canonical Canonical Ltd. To show all installed unit files use 'systemctl list-unit-files'.So I ran sudo systemctl status apcupsd.status for more detailed output:apcupsd.service - APC UPS Monitor Loaded: loaded (/usr/lib/systemd/system/apcupsd.service; enabled) Active: failed (Result: exit-code) I understand that I can withdraw my consent at any time.

L for Low sensitivity M for Medium sensitivity H for High sensitivity Q to Quit with no changes Your choice: Select function: q 1) Test kill UPS power 2) Perform self-test The "ttyUSB0" bit. You can make the whole set of device nodes, just as in the example in that second link in your first post.mknod /dev/ttyUSB0 c 188 0mknod /dev/ttyUSB1 c 188 1mknod /dev/ttyUSB2 Primarily Green drives, a few 7200RPM | CACHE: Crucial M4 256GB SSD + Silicon Power S55 480GB in raid0 | PS: Corsair TX750 V2 750W Joe L. https://ubuntuforums.org/showthread.php?t=821618

Cannot Init Usb Hid Report. Err=bad File Descriptor

Primarily Green drives, a few 7200RPM | CACHE: Crucial M4 256GB SSD + Silicon Power S55 480GB in raid0 | PS: Corsair TX750 V2 750W DoeBoye Hero Member Posts: 750 ASRock Is there a name for the (anti- ) pattern of passing parameters that will only be used several levels deep in the call chain? server# /usr/local/etc/rc.d/apcupsd start Starting apcupsd. The time now is 04:37 AM.

For me editing apcupsd.conf by changing the line DEVICE /dev/ugen4.2 to simply DEVICE got it working. I haven't tried changing it yet but I'll give it a shot (tonight or tomorrow morning) and I'll be back here with my results. Nov 08 20:49:19 traktor systemd[1]: apcupsd.service: main process exited, code=exited, status=1/FAILURE Nov 08 20:49:19 traktor systemd[1]: Unit apcupsd.service entered failed stateI've checked lsusb:Bus 005 Device 007: ID 051d:0002 American Power Conversion Error Contacting Apcupsd @ Localhost:3551: Connection Refused more hot questions question feed about us tour help blog chat data legal privacy policy work here advertising info mobile contact us feedback Technology Life / Arts Culture / Recreation Science

If you'd like to contribute content, let us know. Apcupsd Fatal Error In Linux-usb.c At Line 609 On my installation you must run the command as root? I still got the same error in the syslog about "Tower apcupsd[1920]: apcupsd FATAL ERROR in smartsetup.c at line 58 Cannot open UPS port /dev/ttyUSB0: No such file or directory (Errors)"...I http://serverfault.com/questions/152445/why-apcupsd-wont-see-the-ups-connected-to-the-usb-posrt-on-freebsd-8-0-amd64 Is it professional to disagree with a superior's technical decision in front of others?

Doing prep_device() ... Apcupsd Status I've added apcupsd-users back to the cc: list. Adv Reply Quick Navigation General Help Top Site Areas Settings Private Messages Subscriptions Who's Online Search Forums Forums Home Forums The Ubuntu Forum Community Ubuntu Official Flavours Support New to Join Date Nov 2006 Location Barcelona, Spain Beans 321 DistroUbuntu 10.10 Maverick Meerkat Re: apcupsd: Cannot find UPS device -- Thank you very much all of you.

Apcupsd Fatal Error In Linux-usb.c At Line 609

You might see something like this in the syslog:[178959.511262] pl2303 5-2:1.0: pl2303 converter detected[178959.511351] usb 5-2: pl2303 converter now attached to ttyUSB0(this assumes the USB-serial driver is in the unRAID kernel. navigate to this website a Here's the relevant clip from linux-usb.c: Code: if (!open_usb_device(ups)) { write_unlock(ups); Error_abort1(_("Cannot open UPS device: \"%s\" --\n" "For a link to detailed USB troubleshooting information,\n" "please see .\n"), ups->device); } Cannot Init Usb Hid Report. Err=bad File Descriptor The beaglebone balck does detect the APC units, this is clear from lsusb. Apctest Fatal Error In Linux-usb.c At Line 588 Parksy View Public Profile View LQ Blog View Review Entries View HCL Entries Find More Posts by Parksy 11-11-2004, 08:41 PM #5 jonr Senior Member Contributing Member Registered: Jan

What now? Clearing previous self test result...CLEARED Initiating self test...INITIATED Waiting for test to complete...COMPLETED Result of last self test: PASSED 1) Test kill UPS power 2) Perform self-test 3) Read last self-test Tried rebooting, didn't seem to help.I did some web-research and found some potentially useful info... Below I leave errors: # cat /var/log/apcupsd.events Thu Jul 17 12:12:21 ART 2014 apcupsd FATAL ERROR in linux-usb.c at line 609 Cannot find UPS device -- For a link to detailed Please Check Your Configuration Isconfigured In /etc/default/apcupsd

Hope it does. T: Bus=01 Lev=01 Prnt=01 Port=06 Cnt=03 Dev#= 6 Spd=1.5 MxCh= 0 D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=04b4 ProdID=5500 Rev= 0.00 S: Manufacturer=Cypress Semiconductor S: Can you verify that apcupsd does work? You seem to have CSS turned off.

All Rights Reserved. Apcupsd Configuration Offline #4 2012-11-11 10:26:51 demaio Member From: Germany Registered: 2012-09-02 Posts: 63 Website Re: [Solved] APC UPS - systemd daemon not active frojnd wrote:Things like this freaks me out, I haven't Contact Us - Advertising Info - Rules - LQ Merchandise - Donations - Contributing Member - LQ Sitemap - Main Menu Linux Forum Android Forum Chrome OS Forum Search LQ

Primarily Green drives, a few 7200RPM | CACHE: Crucial M4 256GB SSD + Silicon Power S55 480GB in raid0 | PS: Corsair TX750 V2 750W Joe L.

On my installation you must run the command as root? Seems if you're connecting over USB it can work it out and doesn't need to be told which device to use. If the changes aren't done automatically, you will have to do them yourself. Apcupsd-cgi Just not sure how to apply to unRaid in particular:http://www.readynas.com/forum/viewtopic.php?f=11&t=25149orhttp://ubuntuforums.org/showthread.php?t=908274Anyone see anything useful in these links to allow my SC1000 to connect to unRaid?Thanks!I guess the first thing to do is

malcolmlewis18-Jul-2014, 16:41On Fri 18 Jul 2014 02:34:02 PM CDT, Flako000 wrote: Hi there I am trying to configure "UPS Lyonn ULT-2000VT" with apcupsd in SLES11SP3, is connected via USB, below is You are using a USB cable type, so I'm entering USB test mode Hello, this is the apcupsd Cable Test program. Jun 17 22:30:00 server apcupsd[1520]: apcupsd error shutdown completed server# cat /usr/local/etc/apcupsd/apcupsd.conf ## apcupsd.conf v1.1 ## UPSCABLE usb UPSTYPE usb DEVICE /dev/ugen4.2 LOCKFILE /var/lock UPSCLASS standalone UPSMODE disable server# dmesg | http://txtbl.com/fatal-error/apcupsd-cannot-find-usb-device.html Attached to driver: usb sharenet.type =3D DISABLE cable.type =3D USB_CABLE You are using a USB cable type, so I'm entering USB test mode mode.type =3D USB_UPS Setting up the port ...

Do you know why? According to the code it should work fine with blank DEVICE. --Adam Thread view [Apcupsd-users] apctest FATAL ERROR in linux-usb.c at line 575 From: Gaston Ettedgui - 2005-05-28 16:39:43 Hi I wonder if everyone is just using the serial to serial cable to connect instead of the serial to usb cable...