Home > Fatal Error > Apcupsd Cannot Find Ups Device Centos

Apcupsd Cannot Find Ups Device Centos


The "ttyUSB0" bit. What exactly are sleeping stalls versus waiting-rooms, for airport layovers? I'm at a loss .Unfortunately, my plan on using the other serial/serial cable is currently a no go. Logged UnRAID 6.2.3 x86_64 | CASE: Norco 4224 | MOBO: ASRock EP2C602-4L/D16 | MEMORY: 64GB DDR3 | CPU: Dual E5-2670 | SATA Add-on: M1015 x2 | PARITY: Hitachi 7200RPM 4TB |

server# /usr/local/etc/rc.d/apcupsd start Starting apcupsd. Primarily Green drives, a few 7200RPM | CACHE: Crucial M4 256GB SSD + Silicon Power S55 480GB in raid0 | PS: Corsair TX750 V2 750W DoeBoye Hero Member Posts: 750 ASRock http://www.gastonettedgui.com.ar Re: [Apcupsd-users] apctest FATAL ERROR in linux-usb.c at line 575 From: Adam Kropelin - 2005-05-28 17:36:12 Gaston Ettedgui wrote: > Hi all! > > First, excuse me for my I running a APC Back-UPS RS 1300g on openSUSE 13.1 and the apcaccess comand works fine.

Cannot Init Usb Hid Report. Err=bad File Descriptor

If you need to reset your password, click here. UNIX is a registered trademark of The Open Group. Screenshot instructions: Windows Mac Red Hat Linux Ubuntu Click URL instructions: Right-click on ad, choose "Copy Link", then paste here → (This may not be possible with some types of I have attached a SmartUPS 1000 trough a usb > cable, but always get the same error when run apctest: > > 2005-05-28 13:17:46 apctest 3.10.17 (18 March 2005) slackware >

It will have to download and install, and then I think you'll need to edit /etc/lilo.conf. Luckily I knew from experience recently how to fix that (wrong type of mouse reported, and wrong button assignments). For more advanced trainees it can be a desktop reference, and a collection of the base knowledge needed to proceed with system and network administration. Error Contacting Apcupsd @ Localhost:3551: Connection Refused Thu Jul 17 12:12:21 ART 2014 apcupsd error shutdown completed # apctest 2014-07-18 09:14:16 apctest 3.14.4 (18 May 2008) suse Checking configuration ...

I'm still getting "Error contacting host localhost port 3551: Connection refused" when trying to see UPS sysinfo.I tried a fresh reboot, and the connection error has changed slightly in the syslogCode: Apcupsd Fatal Error In Linux-usb.c At Line 609 Not the answer you're looking for? This part of apctest is for testing USB UPSes. Read More Here For all we know, a device node might be created by the udev system for you when the device is detected.Joe L.

Unless you have a specific need # for this old driver, you should use 'snmp' instead. # # dumb /dev/tty** Old serial character device for use with # simple-signaling UPSes. # Apcupsd Configuration Terms Privacy Opt Out Choices Advertise Get latest updates about Open Source Projects, Conferences and News. For # other UPS types, you must specify an appropriate port or address. # # UPSTYPE DEVICE Description # apcsmart /dev/tty** Newer serial character device, appropriate for # SmartUPS models using How is it packed?

Apcupsd Fatal Error In Linux-usb.c At Line 609

I got my clue from another thread in LQ. Hi jonr I have a similar problem with apcupsd and mdk 10.1 any chance you could post the line you changed Let us know if it works... Cannot Init Usb Hid Report. Err=bad File Descriptor Edit: Seems to be working fine now! Apctest Fatal Error In Linux-usb.c At Line 588 jonr View Public Profile View LQ Blog View Review Entries View HCL Entries Find More Posts by jonr 11-25-2004, 03:20 PM #8 S.Fart LQ Newbie Registered: Nov 2004 Distribution:

apctest may not work >> correctly, though. http://txtbl.com/fatal-error/apcupsd-cannot-find-usb-device.html Edit the label (that's the name that will show up in the bootloader screen). Could I work as a Professor in Europe if I only speak English? For me editing apcupsd.conf by changing the line DEVICE /dev/ugen4.2 to simply DEVICE got it working. Please Check Your Configuration Isconfigured In Etc Default Apcupsd

Logged UnRAID 6.2.3 x86_64 | CASE: Norco 4224 | MOBO: ASRock EP2C602-4L/D16 | MEMORY: 64GB DDR3 | CPU: Dual E5-2670 | SATA Add-on: M1015 x2 | PARITY: Hitachi 7200RPM 4TB | Global Moderator Hero Member Posts: 18900 Re: apcupsd settings for sc1000 « Reply #6 on: April 07, 2011, 06:19:49 AM » Quote from: DoeBoye on April 06, 2011, 09:51:10 PMSo any You are currently viewing LQ as a guest. http://txtbl.com/fatal-error/apcupsd-cannot-find-ups-device.html You problem shouldn't have anything to do with your kernel configuration, since "cat /proc/bus/usb/devices" listed both the ups and a driver.

Please don't fill out this field. Apcupsd Status How to harness Jupiter's gravitational energy? Results 1 to 4 of 4 Thread: apcupsd: Cannot find UPS device -- Thread Tools Show Printable Version Subscribe to this Thread… Display Linear Mode Switch to Hybrid Mode Switch to

Switching to their standard kernel fixed everything.

Both have identical APC configuration files. User contributions on this site are licensed under the Creative Commons Attribution Share Alike 4.0 International License. Vendor is the MIB used by # the UPS device: can be "APC" or "RFC" # where APC is the powernet MIB and RFC # is the IETF's rfc1628 UPS-MIB. # Apcupsd-cgi There is nothing more on /dev/usb Hope to someone help me.

This is used if the # UPS powering your computer is connected to a # different computer for monitoring. # # snmp hostname:port:vendor:community # SNMP network link to an SNMP-enabled UPS Can you verify that apcupsd does work? The line I changed is the one that reads "DEVICE /dev/hiddev0" I think it used to be something like "DEVICE /dev/usb0" or similar. # Here a table of the possible devices Obviously my UPS is working, but I want it to connect to my Linux box so, if power supply fails for more than some few minutes, it can send me an

Doing prep_device() ... Unfortunately, after about 10 seconds, the following error pops up: Code: acupsd FATAL ERROR in linux-usb.c at line 751 Cannot open UPS device: "" -- For a link to detailed USB This does not # set the EEPROM. Attached to driver: usb sharenet.type =3D DISABLE cable.type =3D USB_CABLE You are using a USB cable type, so I'm entering USB test mode mode.type =3D USB_UPS Setting up the port ...

Sorry again. > apcupsd should definitely find the device itself if you set DEVICE to > blank (as you showed in your first email). Which movie series are referenced in XKCD comic 1568? Vendor can be can be "APC" or # "APC_NOTRAP". "APC_NOTRAP" will disable SNMP trap # catching; you usually want "APC". Why was Susan treated so unkindly?

Thanks in advance! Pass --all to see loaded but inactive units, too.