Home > Error V > Vxvm Vxdisk Error V

Vxvm Vxdisk Error V

Contents

Use this operation if you intend to remove a disk from a system without rebooting. Dynamic Reconfiguration Operations Output: Select an operation to perform: 23 Dynamic Reconfiguration Operations WARN: Please Do not Run any Device Discovery Operations outside the Tool during Reconfiguration operations INFO: Collecting OS Create/Manage Case QUESTIONS? a gregsih Level 4 ‎02-14-2013 06:45 AM Options Mark as New Bookmark Subscribe Subscribe to RSS Feed Highlight Print Email to a Friend Report Inappropriate Content Hi Tony you were http://txtbl.com/error-v/vxvm-vxdisk-error-v-5-1-0.html

Only those devices which were previously excluded can be included again. flags: error private autoconfig ... Workaround is to use "dd"  to overwrite the LVM label before excuting step steps 4 and 5 above.  # dd if=/dev/zero bs=512 of=/dev/sdyyy count=1000 Terms of use for this information are Select a removed or failed disk [,list,q,?] list Disk group: newdg DM NAME DEVICE TYPE PRIVLEN PUBLEN STATE dm c4t11d0s2 - - - - NODEVICE Select a removed or failed disk https://www.veritas.com/support/en_US/article.000013219

Vxvm Vxreattach Error V-5-2-238 No Matching Volume Manager Disk And Device Ids Found For

Both 5.1 SP1 RP1 and 5.1 SP1 RP1 P1 VxVMrelated patches for Solaris Sparc can be obtained from https://sort.symantec.com/patches. Close Sign In Print Article Products Related Articles Article Languages Subscribe to this Article Manage your Subscriptions Problem When updating the UDID(Unique Disk Identifier) content for a BCV lun, it To create a new disk group, select a disk group name that does not yet exist.

Disable (offline) a disk device Use this option to disable all access to a disk device through the Volume Manager. Enter a controller name [,all,list,list-exclude,q,?] list-exclude Devices excluded from VxVM: -------------------------- Paths : c1 Controllers : c4 VID:PID : None -------------------------- Hit RETURN to continue. It is possible that updates have been made to the original version after this document was translated and published. Create/Manage Case QUESTIONS?

Example: Initializing all the disk's which are connected to controller ‘C3' Output: Select an operation to perform: 1 Add or initialize disks Menu: VolumeManager/Disk/AddDisks Use this operation to add one or Vxvm Vxdisk Error V-5-1-531 Don't have a SymAccount? Enter disk name [,list,q,?] list Disk group: oradg DM NAME DEVICE TYPE PRIVLEN PUBLEN STATE dm c3t1d0s2 c3t1d0s2 auto 65536 2031232 - dm c3t2d0s2 c3t2d0s2 auto 65536 2031232 - dm c3t3d0s2 https://www.veritas.com/support/en_US/article.000008039 Initializing device c3t4d0.

Display help about menu ?? Unless you get rid of this information which VxVM does check before using the disk, you can't initialise the disk under VxVM. 0 Kudos KapilRaj Honored Contributor [Founder] Options Mark as Email Address (Optional) Your feedback has been submitted successfully! Example: Replacing failed disk ‘c4t11d0s2' with ‘c4t12d0s2' DEVICE TYPE DISK GROUP STATUS c4t9d0s2 auto:cdsdisk c4t9d0s2 newdg online c4t10d0s2 auto:cdsdisk c4t10d0s2 newdg online c4t12d0s2 auto:none - - online invalid - - c4t11d0s2

Vxvm Vxdisk Error V-5-1-531

Enable access to (import) a disk group - Use this option to enable access by this system to a disk group. - If you wish to move a disk group from https://www.veritas.com/support/en_US/article.000014219 precheck to ensure the removed devices are not part of an existing physical volumes or volume groups # pvs ( Report information about physical volumes ) # vgs ( Report information Vxvm Vxreattach Error V-5-2-238 No Matching Volume Manager Disk And Device Ids Found For by running vxdctl enable), then VxVM will in turn mark the disk with error "Disk is not usable".  (DMP will not log further messages in /etc/vx/dmpevents.log this time.)   Solution In order Vxvm Vxdisk Error V-5-1-558 You can specify a list of disks to move volumes onto, or you can move the volumes to any available disk space in the same disk group.

Enter a controller name [,all,list,list-exclude,q,?] c4 VxVM vxdisk ERROR V-5-1-558 Disk c4t14d0s2: Disk not in the configuration VxVM vxdisk ERROR V-5-1-558 Disk c4t14d0s2: Disk not in the configuration VxVM INFO V-5-2-1306 this contact form Required fields are marked *Comment Name * Email * Website Currently you have JavaScript disabled. This operation takes, as input, a disk name. VMware Cloud on Amazon AWS - The Hybrid Cloud 2 weeks ago Setup Amazon AWS - Free Tier Account - Part 3 2 weeks ago Start Amazon AWS with IAM - Vxvm Cheat Sheet

Output format: [Device_Name] c3t1d0 c3t2d0 c3t3d0 c3t4d0 c3t5d0 c3t6d0 Continue operation? [y,n,q,?] (default: y) You can choose to add these disks to an existing disk group, a new disk group, or Example: Enabling off-lined or disabled disks Output: Select an operation to perform: 10 Enable (online) a disk device Menu: VolumeManager/Disk/OnlineDisk Use this operation to enable access to a disk that was It is possible that updates have been made to the original version after this document was translated and published. have a peek here Check for valid driver to major number bindings in /etc/name_to_major:The Solaris operating system uses entries in /etc/name_to_major to bind device drivers such as Volume Manager kernel modules to major numbers.

A VxVM defect involving thedevice suppression and inclusion of EMC PowerPath TPD (Third Party Party) controlled devices was discovered with 5.1 SP1 (Solaris Sparc). Any suggestions would be most gratefuly received. We have followed the replace disk procedure which fails with the message 'no device available to replace'.

The vxdg -C option will ensure the "hostid" stored on the related disks are cleared prior to importing the diskgroup.The vxdg -f option will force import the diskgroup, regardless of any

You will be prompted for a disk name to replace and a disk device to use as a replacement. NOTE: The SRDF (R2) lun is in a write-disabled state at the time of the BCV split operation.In this instance, the configuration consists of "4" EMC SRDF "R1" devices presented to production server Mirror volumes on another disk? [y,n,q,?] (default: n) n After Mirror volume, v oravol - ENABLED ACTIVE 409600 SELECT - fsgen pl oravol-01 oravol ENABLED ACTIVE 409600 CONCAT - RW sd The product functionality initially designed in Veritas Volume Manager 5.0 MP3 does not function in the same way as the 5.1 release, until 5.0 MP3 RP4 HF1 (Solaris) has been applied.

The first stage of encapsulation has completed successfully. Unrelocate another disk? [y,n,q,?] (default: n) n After unrelocating subdisk, v testvol - ENABLED ACTIVE 409600 SELECT - fsgen pl testvol-01 testvol ENABLED ACTIVE 409600 CONCAT - RW sd c4t9d0s2-UR-001 testvol-01 To reboot execute the command: shutdown -g0 -y -i6 This will update the /etc/vfstab file so that volume devices are used to mount the file systems on this disk device. Check This Out Attachment Products Subscribe to Article Search Survey Did this article answer your question or resolve your issue?

Example: Enabling access to import (Disks must be in online state) Output: Select an operation to perform: 8 Enable access to (import) a disk group Menu: VolumeManager/Disk/ImportDiskGroup Use this operation to Veritas Volume Manager 5.0 MP3 RP4 HF1 (Solaris) enables LUN suppression and inclusion using "vxdmpadm include/exclude vxvm dmpnodename=" Prior to the installation of the Veritas Volume Manager (VxVM) 5.0 MP3 It can see them but will not re-add them. Turn off the spare flag for a disk - This option removes a disk from those that can be used as a spare and returns its space to the general pool

WHAT'S HOT ? a re-scan of the disks causes the following output :- [email protected] # vxdisk list DEVICE TYPE DISK GROUP STATUS Disk_0 auto:sliced rootdg01 rootdg online Disk_4 auto:cdsdisk datadg01 datadg online Disk_5 No Yes How can we make this article more helpful?